Home
Visited
times since
03/05/00
|
|
|
The Sequencing Service
School of Life Sciences
MSI/WTB Complex
University of Dundee
Dundee
DD1 5EH Scotland
|
Our New 96 Well Plate Service is
Launched!
Our recently acquired 3730 DNA Sequencer processes
samples in 96 well PCR plates and, after we took delivery of
the sequencer, we mentioned that we would soon be
introducing a new service that would allow customers to send
samples in 96 well plates. After obtaining the necessary
hardware (another PCR machine and a plate spinning
centrifuge), then performing extensive tests to ensure the
robustness of the new procedures, we have migrated all our
own sample processing over to the use of 96 well plates. We
now perform all steps, from initial sample set-up to loading
onto the sequencer, in 96 well plates. Our integration of
plates into all stages of the process now means that we are
in a position to offer our customers the option to send
their samples to us in 96 well plates as well.
Why Would You Want to Send
Samples in a 96 Well Plate?
One reason is the cost! Due to the reduced sample
handling involved, we are able to offer this service at the
reduced rate of 7 pounds per sample (relative to 8 pounds
per sample for our standard service). If you are sending
large numbers of samples, this can result in a significant
cost saving (48 or 96 pounds per plate). Again because of
the reduced handling, you will almost certainly get your
results back quicker than you would if you sent the same
number of samples in individual tubes. Finally, if you are
sending bulk quantities of samples, sending them all in
plates makes it easier for you, since you only have to deal
with one plate rather than hundreds of small tubes!
Okay, so I Want to use the New
Service, What do I Need to do?
Detailed instructions are given on the
Services page, but here is a
brief resume:
- Make sure you have one of the types of plates we
specify (they have to fit in our machine)
- Choose whether you wish to send 48 or 96 samples
- Add your template, primer and water to a final volume
of 16 µl into the appropriate wells
- Seal the plate with adhesive or heat seal film
- Send the plate(s) to us with all the usual paperwork
If you have questions about any aspect of our service,
please don't hesitate to contact
us. If you have any comments you would like to make,
please feel free to use our
feedback form. Also,
please see our Data Protection
Statement.
Home| Search| Information| Services/Prices| Sample
Submission|
Sample
Retrieval|
Useful
Links|
Registering| Downloads| Trouble-shooting| FAQs| SOPs| Terms and
Conditions|
Index
|